A2K-4WD NMEA 2000 4-Way Instrument Drop
Reduce your NMEA 2000 cabling requirements, saving time, space and money.
The Actisense 4-way drop makes it easier to reach up to four devices with a single cable.

Typically, when four devices need to be connected to an NMEA 2000 backbone, a T-piece and individual cable is required for each one. This can either mean excessive cabling demands or moving the backbone closer to your devices.

The 4-way drop makes it possible to shorten the length of each cable needed before reaching a T-piece.

A2K-BULK-100M-MID Mid Bulk Cable Reel
Create or extend an NMEA 2000 backbone of flexible lengths to suit any installation. Enhanced safety with Low Smoke Zero Halogen (LSZH) jacket.
The Actisense NMEA 2000 Mid cable is available in 100 metre reels and ideal for use with the Actisense QNB-1 (Quick Network Block) or Field Fit Connectors (FFC).

NMEA 2000 cable includes five wire within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.

A2K-BULK-100M-MID

A2K-KIT-1a NMEA 2000 Starter Kit 1a (2m cable)
The NMEA 2000 Starter Kit from Actisense provides everything that is required to start an NMEA 2000 installation.
The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.

Read the overview below to discover the contents of this useful NMEA 2000 Starter Kit.

A2K-MPT-2 Micro Power T-Piece
The A2K-MPT-2 is a simple, safe and efficient method of powering an NMEA 2000 network.
NOW WITH IMPROVED STRAIN RELIEF!
The Micro Power T can easily provide power to the NMEA 2000 bus with micro fit connectors to enable ‘plug and play’ connectivity.

The Actisense designed connectors are quality engineered and shaped to allow easy and secure connections, using our specialist interconnect and NMEA knowledge. With its two female connectors, this power T is also fully Devicenet compatible.

The Actisense specified cable is UL certified, the three-metre cable length ensures that the A2K-MPT-2 offers complete flexibility when installing.

To order the Micro Power T-Piece, please use part number A2K-MPT-2.

A2K-SBN-2 8 Way Self-contained Boat Network
Installing small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN) from Actisense.
The equivalent of eight T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are built in which increases the saving on time and space.

A2K-TER Micro Termination Resistors
Actisense terminators are exceptionally robust to withstand the harsh conditions of the marine environment and have been designed for quick and easy installation.
Each NMEA 2000 installation must have precisely two termination resistors installed, on at each end of the backbone, to ensure proper operation and signal integrity.

The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge

NGT-1 NMEA 2000® to PC Interface
Interface your PC to the NMEA 2000® bus.
The NGT-1 is an intelligent NMEA 2000 gateway able to precisely Transfer messages to and from the NMEA 2000 bus. It is compatible with a wide range of Chartplotters, display and configuration applications available for PCs.

Fault-free, NMEA 2000® backbone connections.
The QNB-1 and QNB-1-PMW provide alternatives to multiple connectors, reducing the cost of an NMEA 2000 cable installation. Perfectly suited to areas of high instrument density, as six drops can be connected.